This entry was posted on Saturday, May 15th, 2010 at 11:44 pm and is filed under Chrysler. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
Site Search:
can anybody tell me what connections the stereo has in a chrysler voyager y reg 2001 ?
Do you need one with the twin power connections, or the single 22 pin plug?
read comments (2)
May 16th, 2010 at 12:37 am
The single plug wasn’t used until the 2002 model year in some Chrysler vehicles. A 2001 Voyager will still use the two 7-pin plugs at the radio.
May 16th, 2010 at 12:58 am
The best thing to do is pull the radio out. The old style plugs are 2 plugs that are connected to the radio. The new plug is just one. On the 2001 voyager I want to say it is the old plugs. The new plug starts in 2002. But sometime with this stuff if the car was built closer to 2002 it could have the new plug. It takes 2 min. to pull that radio out to look. There is a small panel right above the ash tray or cup holders”cant remember witch is there” that comes off and there will be two bolts holding on the dash. Get those off and the dash comes off. Then 4 screws holding on the radio and walla. P.S. the ground is the wire or cable that is a separate wire screwed on or clipped on the back of the radio.